Can Office Chair Fit Inside a Sedan?

Can Office Chair Fit Inside a Sedan?

Spread the love

Transporting an office chair to a new office or getting a new one is not easy, especially if your car is a sedan.

However, rather than renting a van or employing a carrier, most individuals will try to squish into the office chair in a sedan.

So, can a sedan accommodate an office chair?

A completely built office chair typically won’t fit inside a sedan. However, you can fit a fully constructed office chair in the sedan’s back seat. Alternative suggestions for transporting the chair in a sedan include partially disassembling the chair or separating the upper from the lower half of the chair.

So, keep reading to find out whether an office chair will fit inside a sedan, how to do it, what risks there are, and more.

Can Office Chair Fit Inside A Sedan?

You can effortlessly disassemble most office chairs into two parts: the upper part and the lower part.

Therefore, transporting such chairs in a sedan or any car is not a big deal.

If disassembling your office chair isn’t an option, then moving a chair in a sedan can be difficult. Here are two crucial factors to take into account while putting an office chair in a vehicle:

Dimensions of an Office Chair 

Office chairs come in a variety of sizes depending on their design and material. However, office chairs typically adhere to conventional size.

  • The adjustable height of the chair seat is 16 to 21 inches.
  • On average backrest height is 19 to 23 inches.
  • Therefore, the standard height of an office chair is 40 inches from the base to the top of the backrest.
  • About 17 to 21.5 inches is the industry average for seat width.
  • The average seat depth is between 16 and 18.5 inches.
  • The wheelbase of an office chair has a 23- to 30-inch diameter.

Dimensions of an Average Sedan Trunk 

The average sedan trunk measures 50 inches broad by 40 inches deep. Therefore, a sedan trunk may easily accommodate an office chair. Right?

But hold on! Is the size of the trunk inside the sedan the same as the trunk opening? Not at all. A sedan trunk opens up to around 40 inches.

So, the question arises, how do enter the chair into a sedan trunk?

Utilizing the lever to lower the height can help you get the office chair to fit through the trunk’s entrance. 

Can an Office Chair Fit in a Sedan’s Backseat 

It is possible to fit an assembled office chair in a car backseat. Use the instructions below to fit an office chair inside a sedan without taking it apart.

  • First, wrap the office chair in bubble wrap or a piece of fabric to protect your automobile from harm.
  • Completely recline the passenger seat in the automobile.
  • Reduce the backrest till it is nearly parallel to the car floor.
  • Insert the desk chair through the passenger-side door.
  • At last, Place the office chair in the backseat with the wheels up.

Tip: Driving slowly and carefully will help you avoid causing any dents, bumps, or scratches on your automobile from the chair.

How to Fit a Desk Chair Fit in a Sedan?

To fit an office chair in a sedan:

  • Take a height and width measurement of your office chair first.
  • Next, determine the trunk size of your vehicle.
  • Thirdly, measure the height of your car’s backseat if the trunk isn’t working.

How to Deliver an Office Chair In a Car Or a Sedan 

Like cars, office chairs are available in a wide range of sizes and designs. Following are some suggestions on; how to transfer an office chair to a car if you fail to fit the office equipment in a sedan.

  1. Remove Some Components of Your Office Chair.

You can make your office chair fit into a car by removing parts like the wheelbase or the armrests. Be careful with small parts removal, as you may lose some screws and bolts.

In order to avoid losing any minor pieces, it is best to put them all in a bag as soon as you take them from the chair.

  1. Disassemble the Office Chair 

If the first option doesn’t work, then you have to dismantle the whole chair. This task can be challenging. However, if you follow the step-wise procedure, then; you can do this effortlessly.

An office chair primarily consists of two components. The wheelbase and gas cylinder are in the lower part, while the Chair seat and backrest are in the upper portion.

You should be able to easily fit both sections inside a car once you detach the bottom part from the upper part.

  • To remove the lower half from the upper part of an office chair, all you need is a pipe wrench.
  • Now, tighten the pipe wrench around the cylinder.
  • Turn the pipe wrench a quarter turn until a cylinder comes off with the wheels. 
  1. Rent a Pickup Truck 

The next best alternative is to hire a larger Truck/car if you lack the confidence to disassemble your workplace chair. Ask a friend or relative who has a larger vehicle, such as a van or a pickup, to transport your office furniture.

  1. Contract with a Licensed Mover

You might need to employ a professional mover if you need to relocate multiple pieces of furniture to another state or city.

The ideal service to save you time and money if you’re planning to transfer your full office set is to hire a professional mover, even though it’s not a cheap alternative.

Final Thoughts 

Hopefully, you now have all the information you need to answer the question, “Can an office chair fit in a sedan?” You can transport some fully assembled office chairs in a sedan. 

However, you will typically need to disassemble the office chair completely or remove some of its components. By doing this, you’ll be able to transfer the office chair inside any type of car.

Similar Posts


Leave a Reply

Your email address will not be published. Required fields are marked *