How To Adjust Office Chair Height Without Lever?

How To Adjust Office Chair Height Without Lever?

Spread the love

Working in an office chair is comfortable when adjusting the height to the right level. Back discomfort, fatigue, and posture-related disorders develop without proper adjustment.

If you work at a desk, spare yourself the pain and set your seat in the ideal position. Any job that requires you to sit in a chair for lengthy periods is a desk job. And doing so can be bad for your health.

There are many different styles of office chairs. Most of the newer versions have a lever in a convenient place. But this article discusses how to adjust office chair height without a lever.

How Do You Pick The Right Height For an Office Chair?

One of the most crucial factors you must consider when buying a new chair or learning the seating height.  But it’s always advisable to measure in advance if you’re unsure.

A seat height between 16 and 21 inches off the ground should be enough for most people. With their thighs horizontal, arms equal to the desk, and feet flat on the floor, the user can comfortably use this desk height.

A good office chair height will have your knees at a 90-degree angle. Check with your feet first. If your feet are on the ground, the seat height must also be high enough to reach the back of your knees.

How To Raise Office Chair, Without Lever

If you are wondering how to adjust the height in office chair? Here are some methods to lift your office chair:

  1. Clockwise And Counterclockwise Adjusting
  2. Adjusting Under-Chair Bolts
  3. How To Raise Office With Wooden Piece

Method 1: Clockwise And Counterclockwise Adjusting

Older office chair models require manual adjustment since they lack a pneumatic lever. The steps are as follows for office chair height adjustment:

  1. Stand Up

Since your office chair lacks a pneumatic lever, you cannot change the height of your seat while seated. Instead, you must get up before adjusting the height of your seat.

  1. Make Manual Adjustments

You can now manually flip your seat clockwise or counterclockwise after getting up from it. Typically, you use the first to lift the chair and the second to lower it.

You must determine which is for descending and which is for raising because it varies from one chair to another.

  1. Measure The Height

Test the seat height after modifying it to see if it suits you and your workplace.

  1. Repeat Until Perfect

If, after one adjustment, the seat is still uncomfortable, repeat the process until you are seated comfortably.

Method 2: Adjusting Under-Chair Bolts

Bolts are sometimes used on chair types instead of pneumatic levers; these are often older models. Such a chair can adjust by turning a sizable bolt at the seat’s base. Follow these steps:

Step 1: Get Up

You must stand up, especially since changing your chair requires turning a bolt under it.

Step 2: Turn The Bolt

Examine which direction (clockwise or counterclockwise) the chair lowers and lifts as you spin the bolt under the seat. Once you’ve found the ideal seat height, you can stop rotating the bolt.

Step 3: Measure The Seat Height

Sit on the chair to make sure the seat is the right height. 

Step 4: Modify As Necessary

If you cannot put your feet on the floor because you are sitting awkwardly. After that, you must sit down to measure the seat height and adjust the chair as necessary.

Method 3: How To Raise Office With Wooden Piece?

Here are the steps for lifting your chair with wooden pieces. Below I mentioned the steps to do that:

Step 1: Utilizing Wooden Pieces

If you want to lift your office chair a few inches without a lever, you can use pieces of wood. I recommend utilizing a 22-inch piece for a better grip.

Step 2: Detach The Seat

You must insert the pieces between the seat and the chair’s lower portion.

The next step is to use a drill to create a hole in the wooden piece. After that, you must fit lengthy screws and nuts through those openings. The number of screws in the chair determines how much wood uses.

The seat back needs to be attached and then reattached after being adjusted. You can lift the chair by a few inches by taking this tiny step.

Step 3: Through Threaded Post

Check whether your chair has a threaded post for height adjustment if you need to lift it slightly. To do that, lubricate the chair while it turns upside down.

Remember that your office chair’s dirt prevents you from using a threaded post to change the chair’s height. Keep your clothing spotless.

The chair can be raised by simply turning it counterclockwise after securing the base with your feet to prevent it from drifting right or left.

Turning it in a clockwise direction is an excellent option if you wish to lower the height. Up till you reach the required height, keep twisting it.

Your chair, however, needs to have a threaded post. If it lacks that, you will need to use pieces of wood to lift it to a rough height.

Frequently Asked Questions:

If your office chair won’t go up or down, this is the issue. A malfunctioning gas cylinder or lift mechanism is typically to blame. 

A cheap approach to raising the height of a dining chair is to use wood blocks made expressly for lifting furniture. Put a wood block under each chair leg and paint or stain it to help it match the color of the chair.

A lower-level seat will repeatedly stress these joints over time, possibly resulting in pain. An appropriate seat height allows you to comfortably lay both feet on the floor and make a 90° bend in your knees and hips.

Conclusion

At the end of this article, you must know how to adjust office chair height without a lever. It can be problematic if your office chairs don’t have proper height adjustments.

You may adjust the height of your office chair without a lever using the easy solutions I mentioned above. 

Similar Posts

3 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *